High Temperature Resistant Slag Pot Casting Ladle Slag Transfer Container

Materials
The pot body is made of cast steel DICAST, a ZTIC brand for castings: the material is similar to A27/A 27M grade 65-35 (April 2003), BS 3100 A1/A2 (January 1991) or DIN 17182 grade GS 20Mn5 (May 1992). DICAST is a fully killed steel, vacuum degassed and machined to a fine grain structure with increased toughness and elongation.
Except for supplying the trunnion forgings and designing the moulds, all other processes are carried out in the company's in-house foundry.
Molding is carried out separately in modular sandboxes using a resin-bonded sand mould process.
Trunns, if present, are preferably cast: they are usually made from steel S355 J2G3, but can also be supplied as cast or hot-fitted trunnions. Melting is carried out in an oxygen steelmaking plant (two 180 ton BOF converters); the ladle capacity allows a continuous bottom pouring process with permanently controlled pouring speed. Metal composition analysis is checked with a computer-connected spectrometer.

Heat treatment
Each casting pot undergoes a composite quality heat treatment (annealing) aimed at grain refinement and stress relief, namely:
- Heating to a temperature above AR3, austenitizing at about 915°C and controlled cooling in the furnace
- Holding between 600°C - 630°C and cooling to 300°C in the furnace for furnace cleaning and finishing

The inner surface is specially treated to completely remove surface defects that could cause slag adhesion. In addition, the castings are shot peened for descaling and the outside is additionally coated for transportation.
The surface quality results from the manufacturer's comprehensive practices and complies with the requirements of MSS SP-55-1996 (Method for visual assessment of surface irregularities).

Quality Assurance
The manufacturing process follows the provisions of the implemented ISO 9001: 2000 quality system.
Standard documentation ensures full traceability of each process step:
Manufacturer test certificate in accordance with DIN EN 10.204 § 3.1, including chemical composition, mechanical properties and non-destructive testing;
Dimensional inspection, with "as-built" sketch;
High-quality heat treatment records;
Documentation required by Machinery Directive 2006/42/EC (where applicable).

Product Parameters

Product Display

Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade.

With a garden-like industrial park and modern standard plant covering 80,000 square meters, ZTIC possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized one with product designing, manufacture, installation and technical services as a whole. The products comprise all the equipments used in mining, cement, metallurgy, construction as well as the related accessories with high power reducer and large-sized castings & forgings, etc.

ZTIC has acquired ISO 9001:2008 Certification of conformity of Management System Certification, Mine Product Safety Authentication, Recognition for BV Mode Ⅱ Survey Scheme in France, Mining Electrical Equipment KY Certification, etc.
The company has also acquired "Fully Quality Management Achievement Award", "Top 50 Enterprises", "Henan Outstanding Innovative Enterprise” and “The Most Powerful Enterprises of Henan" in 2010.

Quality product performance and good reputation, our products have been exported to mnay countries and regions in the world, including: Russia, Serbia, Australia, Mongolia, Indonesia, Bangladesh and other countries, the products are subject to a great welcome and praise.