Widely Applicable And Highly Efficient Vibrating Screen
Scope of Application
This series of vibrating screens is widely used in coal,
metallurgical mining, power generation, light industry, sugar
refining, and other industries. It can perform dewatering,
desliming, and screening operations for various materials, and
simultaneously meet the grading and screening needs of both dry and
wet materials. Its core advantages include large processing
capacity and high screening efficiency.
Working Principle
Screening Principle: Under the action of excitation force, the
material on the screen surface is driven to perform continuous
upward and forward motion. During the throwing process, the
material naturally loosens. When the material collides with the
screen surface, particles with a size equal to or smaller than the
screen mesh pass through the screen, thus completing the
dewatering, desliming, or grading and screening of the material.
Self-Synchronous Operation Principle: The vibrator of the Type B
vibrating screen has no forced linkage design, and there is no need
for gear transmission between the two shafts. To ensure that the
screen body vibrates along a linear trajectory, the two shafts must
maintain strict synchronous, in-phase, and opposite-direction
operation. This motion state can be naturally achieved in the
vibration system of the dual-shaft screen without additional
control.
Damper Vibration Stabilization Principle: The damping vibrators are
assembled according to the calibrated layout. During normal
operation and conventional shutdown, the rubber blocks do not
contact the pre-reserved holes in the base. By applying symmetrical
pressure to the screen box, the position of the screen box is
effectively fixed, eliminating lateral vibration and torsional
oscillation, ensuring stable operation of the equipment.
When resonance occurs during equipment shutdown, the screen box
amplitude exceeds the gap between the rubber block and the base
hole. At this time, the vibration needs to overcome the dynamic
friction force between the rubber block and the screen box; by
using friction damping to consume part of the kinetic energy
generated by resonance, the resonance amplitude can be controlled
within three times the working amplitude, preventing equipment
damage. The damping force can be flexibly adjusted through
adjusting screws to adapt to different working conditions.
Product parameters of Ore Dressing Equipment
| Model | Sieve specifi- cations | Sieve layer | Mesh size | Feeding size | Proce ssing capacity | Motor power | Total weight | Vibra tion freq uency | Double ampl- itude | Obli quity of sieve | Dimensions |
| (L*W)(mm) | Layer | mm | mm | (t/h) | kw | kg | (Hz) | (mm) | °C | (L*W*H)(mm) |
| ZSSW1237 | 3700*1200 | 1 | 4-50 | ≤200 | 10-100 | 5.5*2 | 2250 | 16 | 6-8 | 15 | 3800*2050*1920 |
| 2ZSW1237 | 3700*1200 | 2 | 4-50 | ≤200 | 10-100 | 5.5*2 | 3345 | 16 | 6-8 | 15 | 3800*2050*2200 |
| ZSW1443 | 4300*1400 | 1 | 4-50 | ≤200 | 10-150 | 5.5*2 | 4100 | 16 | 6-8 | 15 | 4500*3040*2500 |
| 2ZSW1443 | 4300*1400 | 2 | 4-50 | ≤200 | 10-150 | 5.5*2 | 4900 | 16 | 6-8 | 15 | 4500*3040*2700 |
| 3ZSW1443 | 4300*1400 | 3 | 4-50 | ≤200 | 10-150 | 5.5*2 | 5870 | 16 | 6-8 | 15 | 4500*3040*2820 |
| 2ZSW1548 | 4800*1500 | 2 | 5-50 | ≤200 | 15-200 | 7.5*2 | 5836 | 16 | 8-10 | 15 | 4800*3140*2814 |
| 3ZSW1548 | 4800*1500 | 3 | 5-50 | ≤200 | 15-200 | 7.5*2 | 6900 | 16 | 8-10 | 15 | 4799*3140*3014 |
| 2ZSW1848 | 4800*1800 | 2 | 5-50 | ≤300 | 50-500 | 7.5*2 | 6489 | 16 | 8-10 | 15 | 4799*3440*2814 |
| 3ZSW1848 | 4800*1800 | 3 | 5-50 | ≤300 | 50-500 | 7.5*2 | 7750 | 16 | 8-10 | 15 | 4799*3440*3014 |
| 4ZSW1848 | 4800*1800 | 4 | 5-50 | ≤200 | 50-500 | 11*2 | 8300 | 16 | 8-10 | 15 | 4799*3440*3503 |
| 2ZSW1860 | 6000*1800 | 2 | 5-150 | ≤300 | 80-600 | 11*2 | 9950 | 16 | 8-10 | 15 | 6000*3440*3326 |
Product Display of Ore Dressing Equipment
Ore Dressing Equipment
FQA
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery,
construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management
certificate and CE, ROHS certificates.
Q:Delivery time :
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms :
A: Accept payment type: T/T, L/C, Western union,Cash. 30% deposit
when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong
we will provide the technical advice and find solution immediately.
For those wearing parts we guarantee high quality parts for
long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and
parts maintenance if end user needs.
